Linux

This step-by-step guide explains how to flash Armbian Linux onto the Bigtreetech CB1 eMMC compute module. While I describe the process for a Windows machine, the steps are very similar for Linux users. The eMMC version of the CB1 has built-in storage, which makes the process slightly more complicated than flashing an SD card for non-eMMC versions. Requirements You will need the following items to complete the process. Hardware A Bigtreetech RPI adapter or a Bigtreetech Manta board to provide the necessary USB and LAN connectors. A USB-C cable to connect and power the CB1 from your Windows machine. For added reliability, I recommend using a USB hub with a dedicated power adapter in between. Software A universal USB driver. See Zadig AllWinner tools to switch the CB1 into USB device mode. See sunxi-tools or Here An Armbian Linux image of your choice. See Armbian for CB1 An image flashing tool. I used Balena Etcher Flash the Image to eMMC Switch to EMMC USB Storage Mode. Set the DIP switches (USB OTG) and (RPI BOOT) to ON to enter BOOT mode Install the Universal USB Storage Driver Connect your CB1 to your windows machine Install and Start Zadig Download and run Zadig List All USB Devices In Zadig, list all USB devices on your machine. Identify Your CB1 Look for your device, which will likely appear as an unknown device. Try each device until you find the one with the correct USB ID If you cannot find it, ensure that the DIP switches are set correctly and that your USB connection is functioning properly. Install Driver Enable CB1 eMMC Storage as an USB Storage Device Download Required Files ...

Hi guys, I will start a series of posts about configuring Arch Linux in a slim, straightforward way. But let me begin with some pros and cons about the Arch Linux distribution here. The Arch Linux distribution describes itself as “a lightweight and flexible Linux distribution that tries to Keep It Simple” Thats it - Arch Linux is absolutely the right distribution for you, if you like a system, what only does, what you have installed and configured. It does it only that way, no magic happens. In addition it has a great community with a up-to-date wiki about nearly all aspects of the system. So if you have to configure a package, it’s mostly enough to follow the associated article there. ...